• Less than100mWground unit transmission in full compliance with CE and FCC certification
• 5dBi omni-directional antenna offers an enormous distance of up to1.7 km (1.05 miles)
• Optional 14dBipatchantenna boosts transmission distance tremendously to 5km (3.1 miles)

• AV input
• HDMI input
• DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data)
• HDMI HD image output
• USB 2.0 image data output for iOS and Android phones and tablet synchronization

• Uplink remote control transmission and downlink video work simultaneously on2.4GHz.
• Remote control data travels to the uplink via the TX-Thru Port at the same time that video is streamed back down all without interference.
• Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control(6 Channels). Control signals are received in the air and then transmitted to the flight controller through D-BUS.
• When used with a non-2.4G radio transmitter, video only transmission operation is supported. The DJI 5.8G radio transmitter is recommended.

• Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS)
• technology is used for uplink transmission to enhance stability and offer anti-jamming capability.
• MIMO multi-antenna technology and OFDM modulation methods along with advanced algorithms are utilized for downlink transmission to enhance data bandwidth, improving dynamic performance and increasing stability even in harsh environments.
• Channel interference is constantly monitored during downlink transmission with automatic switching between 8 channels for the best possible signal.
• Up to 8 downlinks can be connected for parallel streaming and work independently without interference.

Maximum latency of up to 80ms

• No additional equipment required for OSD functions when used with A2/WooKong-M/Naza-M V2 flight controllers. Flight parameters will be displayed onscreen.
• OSD functionality can be turned off via mobile software for HDMI and iOS/Android Output.

• DJI A2, WooKong-M and Naza-M V2 flight controllers
• Phantom 2, with DJI 5.8G radio transmitter.

• A single air unit can transmit to multiple ground units sending video to multiple screens. (Only one of the ground units can send a control signal while additional ground units will only be able to receive a video signal)
• Encryption ensures only authorized devices can receive data which can be programmed via mobile device software.

• Ground unit has a built in high capacity 4000mA battery offering up to 4.5hours of use per charge.
• Rechargeable through the supplied charger or via a3S~6S Li-Po power battery. A full charge takes approximately1.5 hours.
• LED battery level indicator
• Also functions as a USB charger for mobile devices prolonging the life of peripheral equipment.

• Aluminum alloy casing
• Extreme internal and external shielding for interference protection.